Dealer Signin Signin Signup

ALAT 30

Specification

According to the project and details,

  • Aypan TU profiles made of galvanized steel sheet according to TS EN 14195 should be fixed to the existing wall by using Aypan screws and plastic dowels at 60 cm intervals. The first main bearing profile axis should be marked on the ceiling at a distance of 10 cm from the existing wall. The lines on which consecutive axes are to be fixed shall be determined with a maximum distance of 110 cm. Aypan steel dowels must be fixed on these lines with a maximum distance of 90 cm. Suspension rods must be attached to Aypan steel anchors.
  • Hanger tongs must be attached to the Aypan hanger rods. Aypan TC profiles should be cut. Aypan TC profiles should be leveled by attaching to Aypan hanger tongs and thus the main carrier should be formed.
  • In the direction perpendicular to the main carrier TC profiles, the secondary carrier TC profiles must be secured with a clip. Joints should be used in the joints of TC profiles.
  • Aypan should be fixed to TU and TC profiles with 25 mm Aypan self-tapping screws.
  • If necessary, Aypan should be cut and sized. Aygips joint filler gypsum should be pre-filled with gaps of more than 3 mm.
  • Screw heads should be covered with Aygips grouting plaster.
  • Joint tape should be adhered to Aypan joints.
  • Suspended ceiling should be formed by applying Aygips joint filler plaster on the joint tape.

The price is 1 m2 including all kinds of materials and losses, loading in the workplace, horizontal and vertical transport, unloading and contractor profit and general expenses.