Specification

According to the project and details,

·Aygips Adhesive Plaster mortar should be applied at least 4 clusters in the direction of Aypan width and 40 cm each in the direction of the back of the board.

·Aypan wedges should be placed between the lower edge of the Aypan and the flooring.

Performance

It is a cladding wall system applied by gluing on the wall such as brick, pumice, gas concrete. Aygips Gypsum Board is formed by bonding a single layer of Aypan using Bonding Plaster.

· It can be used in order to obtain a smooth surface on the scales and broken walls. Sound, heat and fire resistance of the wall improves performance.

·The system is light, does not put too much load on the building. Minimizes loss of life and property against seismic loads.

·It is also used in repair and renovation works.

·max. It can be applied up to 4.50 m height. The sound insulation performance of the system will vary according to the existing wall behind it. (Between 49-58 dB.) Adhesive plaster clusters should be arranged at 30cm width and 40cm length intervals.

· Easy to apply, fast and economical.

·Aypan should be adhered.

·If necessary, Aypan should be cut and sized.

·Pre-fill the gaps more than 3 mm with Aygips grouting plaster. Joint tape should be adhered to Aypan joints.

·The cladding wall should be formed by applying Aygips joint filler plaster on the joint tape.

All kinds of materials and losses, workplace loading, horizontal and vertical transport, unloading and contractor profit and general expenses, including 1 m2 price.

Quantities